SM-CYY004 4 W dental laser





1.Use the wavelength of 808nm or 980nm which are within the biological cells’absorption
peak range and have the best effect on human tissue surgery;
2.Use GaAs diode laser which has the advantages of few heat and power consumption,
stable output power, long life and so on;
3.Use smooth cut end light guide fiber (a variety of fiber core diameters are optional),
which is flexible in operation and easy to use;
4.Use programme built-in embedded chip, 5 inch color LCD touch resistive screen, manmachine
interface for control system. It’s reliable and easy to operate;
5.Have many output modes including continuous, repeated pulse and so on which are
available for different surgery needs;
6.Have power detection system which can correct the power automatically according to user
7.Have fiber plug-in detection function. In order to prevent light-colored light, the fiber
must be detected to make sure the therapeutic equipment can work properly;
8.Use 650nm red diode laser as aiming beam to facilitate positioning during physician’s
9.Have over-temperature protection, remote chain, emergency stop protection system;
10.Use wide voltage input which can be applied to the worldwide net power;
11.Desktop styling, compact, easy to move and carry


1.Laser type: GaAs diode laser
2.Laser wavelength: 808nm & 980nm
3.Laser mode: Multi mode
4.Output power : 0.5 ~ 4W ,adjustable
5.Divergence angle: ≤ 25 mrad
6.Power instability: ≤ ± 10%
7.Aiming beam: Aiming Power, 635num
±10nm; 3mW
8.Delivery system: Fiber: Standard
configuration:support the fiber with diameter of
200um, 300um,400um,
600um,800um,(optional).400um fiber treatment
handpiece (disposable fiber head), beam
expand raying head for whitening.
9.Operation and control: LCD Color touch
screen, microcomputer control
10.Operation mode: Continuous output,
repeated pulse output
11.Pulse Duration: 50μs ~ 900ms
12.Cooling system: Air Cooling System
13.Host input voltage:DC 5V
14.Adepter input voltage: AC
110V~220V±20% 50Hz~ 60Hz±1Hz

Leave a Reply

Your email address will not be published. Required fields are marked *